single phase 4.0 amp bridge rectifiers maximum ratings and electrical characteristics rating 25 c ambient temperature uniess otherwies specified. single phase half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current .375"(9.5mm) lead length at ta=50 c dimensions in inches and (millimeters) features peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) maximum forward voltage drop per bridge element at 4.0a d.c. maximum dc reverse current ta=25 c at rated dc blocking voltage ta=100 c storage temperature range, tstg operating temperature range, tj kbj4 0 1 kbj4 02 kbj4 03 kbj4 04 kbj4 06 kbj4 08 kbj4 10 units 50 100 200 400 600 800 1000 v 50 100 200 400 600 800 1000 v 35 70 140 280 420 560 700 4.0 200 10 500 -65 +150 -65 +125 v a a v u a u a c c * ideal for printed circuit board * low forward voltage * polarity: marked on body * mounting position: any * weight: 4.8 grams kbj4 01 th r u kbj4 10 1.0 voltage range 50 to 1000 volts current 4.0 ampere * low leakage current * both normal and pb free product are available: * normal:80~95%sn,5~20%pb * pb free:99 sn above can meet rohs enviroment substance directive request dimensions in inches and (millimeters) kbj-4 * both normal and pb free product are available: * normal:80~95%sn,5~20%pb * pb free:99 sn above can meet rohs enviroment substance directive request .1 50 ( 3 .8) .1 34 ( 3 .4) .165(4.2) .149(3.8) .0 31 ( 0.8 ) .0 24 (0. 6 ) .6 02 (1 5. 3) .578(14.7) . 708 (1 8.0 ) .677(17.2) .300(7.7) .287(7.3) .043(1.1) .035(0.9) .145(3.7) .130(3.3) .992(25. 3 ) .9 83 (2 4 . 7 )
0.1 1.0 .01 10 50 rating and characteristic curves ( kbj4 01 thru kbj4 10 ) fig.4-typical reverse characteristics fig.1-typical forward current average forward current,(a) fig.2-maximum non-repetitive forward surge current peak forwaard surge current,(a) percentage of peak reverse voltage, (%) 1 2 3 4 5 6 100 50 150 250 200 20 40 60 80 100 120 140 3.0 single phase half wave 60hz resistive or inductive load case temperature ( c) derating curve 0.1 1.0 .01 10 50 fig.3-typical forward characteristics instantaneous forward current,(a) forward voltage,(v) pulse width 300us 1% duty cycle 0 .2 .4 .6 .8 1.0 1.2 1.4 3.0 reverse leakage curren t , ( u a) 0 25 50 75 100 125 150 175 tj=100 c tj=25 c tj=25 c number of cycles at 60hz 1 10 5 50 100 tj=25 c 8.3ms single half sine wave jedec method
|
